Quick Remedy E Invalidarg is the result code for VirtualBox (0x80070057) [Partition Resize]


e invalidarg is the outcome code (0x80070057)

The VirtualBox – Error can appear on the Windows operating system at times. This problem is accompanied by a descriptive error message that says something like “failed to import appliance result code: e invalidarg (0x80070057)” or something similar. Many users are irritated by this issue. MiniTool will discuss this error, including its origins and solutions, in this article.

Quick Access to Information:

  • E Invalidarg is the result code (0x80070057)
  • E Invalidarg is the reason for the result code E Invalidarg (0x80070057) Appears\sFix Fix #1: Obtain Enough Disk Storage Space 
  • 2: Modify the File System on Your Hard Drive
  •  3: Verify and adjust the time and date fix
  •  4: Scan for Hidden Viruses and Remove them 
  • 5: Locate and Repair Corrupted Drives 
  • 6: Repair the system via a system restore.
  •  7: Install the Windows Operating System from Scratch

E Invalidarg_(0x80070057)

If you run VirtualBox on a Windows device, you could get a lot of issues. The result code e invalidarg is one of the most prevalent errors (0x80070057). If you search through Windows-based forums or communities on the Internet, you’ll see that many people are asking for help with this problem.

For example, a user on the Reddit community has posted this mistake and is seeking assistance from others. Everything you need to know about his job is right here.

Why does your computer experience e invalidarg (0x80070057)? The next part will look into the various causes of this problem. As a result, you should pay attention to the following information.

Why does E Invalidarg (0x80070057) appear as a result code?

It’s critical to understand the causes of the terror e_invalidarg 0x80070057. There are no clues in the error message if you just look at it. The potential reasons are determined based on the time the error occurs and other indicators of the error.

Given that the e invalidarg (0x80070057) problem occurs when Windows is unable to access the storage drive, a normal hard disc, or an SSD, we deduce that insufficient free storage space on the hard drive is the primary cause of the error.

The result code e invalidarg might also be caused by a bad file system on your hard drive (0x80070057). FAT32, in particular, does not support files larger than 4GB. In this instance, you’ll need to change your drive’s file system from FAT32 to NTFS.

If the hard disc has two or three partitions, the error could be caused by one of the corrupted partitions. Over time, the drive or partition may get corrupted. Furthermore, bit rot will develop after a period of time. You may do this by using some programmes to examine your drive’s health and performance.

Viruses and other problems with the installed programme might also cause the error code: e invalidarg (0x80070057). Other elements, in addition to the ones listed above, can produce the e invalidarg (0x80070057) issue.

All of the aforementioned explanations are plausible causes for the error, but there is no precise way to determine the exact cause of the problem. As a result, you can attempt each of the methods one at a time until the problem is resolved.

Top 7 Solutions for a Positive Outcome E Invalidarg is the code (0x80070057)

  1. Make sure you have enough disc storage space.
  2. Change the file system on your hard disc.
  3. On your computer, check and update the time and date.
  4. Virus detection
  5. Locate and repair a corrupted drive.
  6. Restore the system.
  7. Install Windows from scratch.

Fix 1: Make sure you have enough disc storage space.

When performing activities on your PC that runs VirtualBox, you may receive this error if you don’t have enough storage space on your hard disc. In truth, problems like the 0x80300024 error and runtime errors might be caused by a lack of free storage space.

MiniTool Partition Wizard can help you acquire additional disc space for your device. You may get more space for your drive by using the resize/move partition and extend partition options. Of course, you may use this program’s Space Analyzer to figure out what’s eating up your space and then eliminate the related objects.

By selecting the button below, you may download and install MiniTool Partition Wizard, and then start resizing and expanding your storage space. MiniTool Partition Wizard Free Edition is all you’ll need in this case. If you want to recover missing data or a lost partition, you should get the Pro Ultimate Edition.

Before you begin resizing or moving your partition, double-check its placement on the hard drive. To resize a partition, make sure there is unallocated or free space adjacent to the partition you want to resize. You can use the extended partition feature instead if there isn’t one.

Step 1: From the pop-up menu, right-click the partition you want to extend and select Move/Resize.

Step 2: To resize your partition, move the button in the following window. You can also resize partitions by entering the exact value beneath the Partition Size. Then, to save the modification, click OK.

You should shift the button to the right. You can reduce the size of your divider by moving leftward.

Step 3: After returning to the main interface, you’ll see the target partition’s size and layout. It will not take effect until you click Apply to complete the operation.

How to Extend a Partition

Moving/resizing and extending partitions can both increase the size of your partition. However, in the following two scenarios, expanding the partition is recommended.

  • You want to extend a partition to non-contiguous free or unallocated space.
  • On the hard disc, there is no unallocated or free space.

Step 1: From the elevated menu, right-click the target partition and select the Extend feature.

Step 2: Select a partition or unallocated space to take space from from the drop-down menu under Take Free Space from. The sliding handle can then be moved left or right to determine the volume of space you want to take from the target partition or unallocated space.

Step 3: Then, on the main interface, click OK and then Apply to complete the operation.

(Fix 2) Change the File System on Your Drive

 The virtualbox e invalidarg problem can potentially be caused by the drive’s file system being misconfigured. As a result, changing the file system of your disc is one of the remedies to the mistake. You can do this while formatting your partition, but data loss may occur as a result of this procedure.

What does formatting a hard drive imply?This page will give you additional details.

Things are different if you utilise MiniTool Partition Wizard.Without losing data, you can convert FAT32 to NTFS. What should I do? After you’ve downloaded and installed this tool, you can proceed to the steps below.

Step 1: Right-click the partition you wish to convert to NTFS and select Convert FAT to NTFS from the context menu.

Step 2: Click the Start button on the next window. MiniTool Partition will then begin transforming the file system on its own.

If you get the file system error 2147219196, follow the steps below to resolve it: [Fix 3 Works Well] 7 Solutions to File System Error – 2147219196

Fix 3: Double-check and change the time and date.

The e invalidarg (0x80070057) error is occasionally triggered by the incorrect date/time combination. Even if the chances are slim, you should check the time and data on your computer.

For example, if the battery on your motherboard that keeps the BIOS running is low on power or fails, your computer’s date and time will reset to the default value every time you turn it off.

There’s no denying that the default time isn’t in sync with the current date and time. And this will cause problems for you, such as the result code: e invalidarg (0x80070057). How can I check and adjust the time and date on my computer? The specifics will be revealed in this article.

Fix 4: Run a virus scan to see if there are any hidden viruses.

If you have any viruses or spyware on your computer, you may experience e invalidarg (0x80070057). This necessitates the use of an antivirus programme on your computer. If you have one installed, simply run it to scan your device for viruses and other dangerous software. If you don’t have any, you can use a single piece of antivirus software to complete the task.

You can use these strategies to clean up your computer if you want to make sure it is clean.

Fix #5: Locate and Repair Corrupted Drives

When your hard drive becomes corrupted or destroyed, you may have problems like 0x80070017, xlive.dll missing error, SFC Scannow failed to fix error, result code: e invalidarg (0x80070057), and so on.

As a result, you should verify the health of your hard disc. What should I do? MiniTool Partition Wizard comes to the rescue once more. It may check your hard drive for faulty sectors.

If you find any, you can correct them. Here’s a step-by-step guide on checking and fixing your hard disc.

If your hard disc is no longer functional, you may want to consider replacing it.

Fix #6: Perform a system restore.

When you encounter certain sorts of crashes and computer problems, the built-in system restore feature in Windows can help you restore your computer to a previous state. In this manner, your PC will resume normal operation. This is a simple solution.

Why Does My Computer Keep Crashing? is a top recommendation. found Answers and solutions here.

However, any modifications you’ve made to your computer, such as freshly installed software, newly created folders, and so on, will be lost. As a result, before conducting the system restore, make a backup of your vital data. After that, you can restore your computer to its previous state in Windows 10/8/7 by following the procedures outlined in this article.

Fix 7: Reinstall the Windows operating system.

If the result code: e invalidarg (0x80070057) error persists after attempting the procedures above, consider completing a clean Windows installation. Similarly, you should make a hard disc backup of any vital data before doing so.

Then, following these extensive steps and directions, you can reinstall Windows.

You may use the top 7 methods in this post to repair the error message “failed to import appliance result code: e invalidarg (0x80070057)” on your PC. It’s rather simple to use, as thorough instructions or related links have been provided.

You can also express your comments on the topic – virtual box e invalidarg, e_invalidarg 0x80070057 in the comment section below if you have any queries regarding Mini Tool program.


Please enter your comment!
Please enter your name here